Miva Merchant 10.00.x Bug Reports

[wesbosse]

In order workflow creation, the function call on "Save" button click event has a typo.

"Primarye" -> "Primary" got it to fire correctly on my side.

loving the new version so far!

[henryfrank]

When adding an Order Workflow and hitting the final "Create" button I get an error that I believe is a typo. The error is this:

clientside.mvc?T=3cfb6765&Module_Code=orderworkflo w&Filename=combined.js:1287 Uncaught TypeError: dialog.Button_Add_Right_Primarye is not a function
at OWFWorkflow_AddEditDialog.Save (clientside.mvc?T=3cfb6765&Module_Code=orderworkfl ow&Filename=combined.js:1287)
at OWFWorkflow_AddEditDialog.Event_OnClick_Create (clientside.mvc?T=3cfb6765&Module_Code=orderworkfl ow&Filename=combined.js:960)
at OWFWorkflow_Step_Overview.step.onClick_Create (clientside.mvc?T=3cfb6765&Module_Code=orderworkfl ow&Filename=combined.js:1005)
at MMButton.<anonymous> (clientside.mvc?T=3cfb6765&Module_Code=orderworkfl ow&Filename=combined.js:2183)
at MMButton.button_click_evt (clientside.mvc?T=3cfb6765&Filename=admin/core.js:5269)
at MMButton.OnClick (clientside.mvc?T=3cfb6765&Filename=admin/core.js:5415)
at MMButton.OnMouseUp (clientside.mvc?T=3cfb6765&Filename=admin/core.js:5523)
at HTMLDocument.MMButton.event_mouseup (clientside.mvc?T=3cfb6765&Filename=admin/core.js:4947)
OWFWorkflow_AddEditDialog.Save @ clientside.mvc?T=3cfb6765&Module_Code=orderworkflo w&Filename=combined.js:1287
OWFWorkflow_AddEditDialog.Event_OnClick_Create @ clientside.mvc?T=3cfb6765&Module_Code=orderworkflo w&Filename=combined.js:960
step.onClick_Create @ clientside.mvc?T=3cfb6765&Module_Code=orderworkflo w&Filename=combined.js:1005
(anonymous) @ clientside.mvc?T=3cfb6765&Module_Code=orderworkflo w&Filename=combined.js:2183
button_click_evt @ clientside.mvc?T=3cfb6765&Filename=admin/core.js:5269
MMButton.OnClick @ clientside.mvc?T=3cfb6765&Filename=admin/core.js:5415
MMButton.OnMouseUp @ clientside.mvc?T=3cfb6765&Filename=admin/core.js:5523
MMButton.event_mouseup @ clientside.mvc?T=3cfb6765&Filename=admin/core.js:4947

If I go into the Sources tab in dev tools I get this function with the error that 'dialog.Button_Add_Right_Primarye()' is not a function:

 button_save = dialog.Button_Add_Right_Primarye( 'Save', '', function() { self.Save_LowLevel( data ); } );

I took the 'e' off of "Primarye" making it 'dialog.Button_Add_Right_Primary' and was able to get the workflow created, though that seems like an obvious type that will prevent a lot of workflows getting created.

[Kent Multer]

OK, I can get to the product page with that. But the old button would show me the product page with one click. The new one triggers Firefox to give a warning about theadmin page opening a pop-up. So it takes me a couple more clicks to actually get the product page to appear. Not a huge problem, but can this be fixed?

[Eric Foresman]

Well, I haven't bought a laptop in several years, so I don't what the common screen size is now. But there's a lot of white space on those pages; I bet you could trim it down to 1280 pixels wide without much trouble.

Another thing I just noticed: on the admin page for editing a product, the "View on Live Store" button is gone -- at least it's not where it was before. Did that go away? I find it very useful; I use it quite often.

Thanks --

the view store button is now always present at the top of the screen, it is also conditional. If you happen to be viewing a product or category when you click it the page will open to that product or category, otherwise the button will open to the storefront page.

view_store_button.png

[Kent Multer]

Well, I haven't bought a laptop in several years, so I don't what the common screen size is now. But there's a lot of white space on those pages; I bet you could trim it down to 1280 pixels wide without much trouble.

Another thing I just noticed: on the admin page for editing a product, the "View on Live Store" button is gone -- at least it's not where it was before. Did that go away? I find it very useful; I use it quite often.

Thanks --

[Eric Foresman]

How do you add a new module to a domain? Previous versions had that plus-sign button on the Modules admin page, but it's gone in version 10.

Also, in the new admin pages, I think the minimum screen size is too large. I usually keep my browser windows about 1200 pixels wide. That always worked fine in previous version of admin. But now, most of the pages seem to extend a couple of inches past the right margin; I have to scroll to see the rest of the page. I gather that the in-house developers all have huge screens. But not all of us have that luxury, especially when traveling and using a laptop.

Thanks --

Hi Kent

The screen you are looking for has been moved to Menu > Domain settings> Modules (tab). There you will find the old modules screen where you can upload new modules and mark modules as active or not.

And you are correct in mm10 the minimum screen size was updated to 1366px wide.
-Eric

[Kent Multer]

How do you add a new module to a domain? Previous versions had that plus-sign button on the Modules admin page, but it's gone in version 10.

Also, in the new admin pages, I think the minimum screen size is too large. I usually keep my browser windows about 1200 pixels wide. That always worked fine in previous version of admin. But now, most of the pages seem to extend a couple of inches past the right margin; I have to scroll to see the rest of the page. I gather that the in-house developers all have huge screens. But not all of us have that luxury, especially when traveling and using a laptop.

Thanks --

[Eric Foresman]

I have an attribute template that is a checkbox with an inventory variant.

When I add the template to a product, and then go to Inventory Kit Builder, I click on the Checked option, add the part, and save. But when I look at the list, it shows the part that I added under the Not Checked option. If I generate variants, I can see that the part that I added is added on the unchecked variants, and since there's a price attached to the part, when I check the live site, its adding the extra price when the option is not checked.

This hasnt affected my current products, but if I try to add a new product with the checkbox, or edit a current product it will happen so for now I need to leave that attribute off new products.

Hi heatherwebdev

Sorry for the long delay in response, it took me a while to reproduce this. But I have and it has been filed.

Thanks for letting us know about this issue.

-Eric

[Eric Foresman]

I have one customer in the store. I have added products and price groups.
I added a business account
I went into the business account.
I decided to click on the tabs.
customer, notes, orders.

of course there are NO orders in the store yet.

try 1.

I did not assign a customers to the business account.
when I click on orders. I get a mysql error.

"mysql_stmt_prepare: Unknown column 'ba.id' in 'where clause'"

try 2.
Then I added the customer to the business account,
creating an order from the admin side for the customer,
tried to see the business account orders and I still get the same error.

Mac Catalina 10.15.6 with Safari version Version 14.0 (15610.1.28.1.9, 15610)
Version Miva Merchant 10.00.02
MivaScript Engine v5.34
miva10-bizaccount-orders-mysqlerror.png

Hi kayakbabe

I have filed a bug for this issue, thanks for letting us know about it.

-Eric

[kayakbabe]

I have one customer in the store. I have added products and price groups.
I added a business account
I went into the business account.
I decided to click on the tabs.
customer, notes, orders.

of course there are NO orders in the store yet.

try 1.

I did not assign a customers to the business account.
when I click on orders. I get a mysql error.

"mysql_stmt_prepare: Unknown column 'ba.id' in 'where clause'"

try 2.
Then I added the customer to the business account,
creating an order from the admin side for the customer,
tried to see the business account orders and I still get the same error.

Mac Catalina 10.15.6 with Safari version Version 14.0 (15610.1.28.1.9, 15610)
Version Miva Merchant 10.00.02
MivaScript Engine v5.34
miva10-bizaccount-orders-mysqlerror.png

[heatherwebdev]

I have an attribute template that is a checkbox with an inventory variant.

When I add the template to a product, and then go to Inventory Kit Builder, I click on the Checked option, add the part, and save. But when I look at the list, it shows the part that I added under the Not Checked option. If I generate variants, I can see that the part that I added is added on the unchecked variants, and since there's a price attached to the part, when I check the live site, its adding the extra price when the option is not checked.

This hasnt affected my current products, but if I try to add a new product with the checkbox, or edit a current product it will happen so for now I need to leave that attribute off new products.

[marshallw]

Okay, I am testing and will creating user accounts on my dev site, I was not able to confirm accounts because the confirmation email was not sending to the user.

[kayakbabe]

I read the reasoning and that makes sense. I'm an original Koolcat/HTMLscript/and all the inbetween. I like that you showed the history.
But there isn't any info on how the new sorting works.
Does dragging and dropping change the display order? if so, why is display order the label on the button, makes me think that if I drag and drop it only changes what I see in the admin, not in the gui for the customer. Or do all changes I make on that screen affect the gui?

I also figured out I can sort things in the admin by click the column header.. LOVE IT!

Can I sort by combining columns like click on price and then also click on code/name so I can do combined sorting, say I want to look at all my items that are 12.00 or less and want to sort by the codes/skus?

[Brennan]

Some additional context on the new sorting. Previously there were 3 different buttons which were all used for sorting. And the way the batch list worked, when you wanted to sort, you first needed to reload the entire list to a default state before you could sort. For existing Miva users, they had years of muscle memory to do this. However, for new to Miva, when they tried to sort it was very confusing.

So in Miva 10 we decided to move all the sorting functions to its own sort menu. The good news is that this is the same for every batch list so once you know where the new sorting button is, it's consistent for anything you wish to sort. It's now its own screen which avoids the list reloading. Also, because its now its own screen it made adding things like drag and drop far more intuitive.

We talk a little about the sorting problem here: https://www.miva.com/blog/miva-10-history/

[kayakbabe]

hmm that wasn't intuitive at all.

It did work for me that way. Thank you Psydde!

I wonder why they made it a different screen instead of just putting it on the the images tab. It really doesn't make sense to me to leave to a page that looks exactly the same with the same things (images) listed on it. So it isn't a bug per se, it's more of a confusing gui issue.